welcome

good

[ Accueil ] [ Qui suis-je ? ] [ Mon itinéraire ] [ Livre d'or ] [ Album photos ] [ Archives ] [ Mes amis ] [
]

YOUOBD2.COM Blog-About car diagnostic tool,auto key programmer,ecu chip tuning,mileage programmer introduction, setup, update and FAQ

Autel MaxiDiag MD808 PRO is the newest autel scanner. If you have general repair shops (Perfect for servicewriters), body shops, used car dealerships, auto repair shop, brake facilities,DPF Auto Repair shop, and transmission repair shops,  autel md808 pro is your best choice for repair cars .   it support multi- function as following :

Support Read/Clear Codes and Live Data functions for ALL systems

Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems

Support oil service reset

Support battery registration and reset

Diesel particulate service including forced regeneration

Reset steering angle sensor (SAS) functionality

Relearn parking brake pad after replacement

Reset service mileage and service intervals

Turn off ECU brake warning light

Perform O2 monitor, on-board monitor, I/M readiness and component testing

Global OBD II coverage for U.S. domestic, Asian and European makes and models

All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

1-1

Autel MaxiDiag MD808 Pro are  available all over the world. you can use it anywhere.  it update online free . Comparing with MD802 , Autel MD808 pro is not just a diagnostic tool, but a professional service tool to service individual specialized systems, including Oil Reset, EPB, SAS, BMS and DPF

Autel maxidiag md808 pro with many advantage:

Brand New Design: Autel MD808pro at Youobd2.com, a revelation in diagnostic and service tool is launched with brand–new exterior in terms of design, structure and buttons;

Efficient Diagnosis: Offer more advanced features and functions to troubleshoot basic four systems (Engine, Transmission, SRS and ABS) for major vehicles on the road today;

Professional Service Tool: Loaded with enhanced service functions, such as oil reset, EPB, SAS, BMS and DPF, offers quick and easy solution to everyday task in the workshop;

Powerful Hardware: Included with 16G Micro SD Card, full color 800*480 display to take your diagnostic experience to a whole new level;

1-3

1-4

http://autelscanner.blogspot.com/2017/09/some-autel-scanners-hot-sale-on-our.html



[ 15:13 ] [ 9/09/2017 ] [ ] [ 0 commentaires ] [ Ajouter un commentaire ] [ Lien ]
Mots clefs : Autel MaxiDiag MD808 PROMaxiDiag MD808 PROMD808 PROAutel MD808pAutel MD808 proAutel MD808 pro Scan ToolAutel MaxiDiag MD808MaxiDiag MD808Autel MD808MD808

Autel MaxiSys MS908P Cannot Communicate after Upgrade (Solved)

Autel MaxiSys MS908 or Autel MaxiSys Pro MS908P automotive diagnostic scanner can not communicate and diagnose vehicles after upgrade problem solution provided.

Problem:

One of the Autel MS908 scanner users has newly got the scan tool at www.youobd2.com updated software he need to latest version, but the newly upgraded Maxisys system can not communicate/access to car.  So He decided to run an upgrade again.

But the device prompted it is the latest version. Then He tried to diagnose other models. He followed the system instruction to turn ignition switch to ON position, but the device still prompted turn ignition on and fail to communicate and diagnose any cars.

Possible reason:

Incorrect update procedure or did not upgrade software completely.

Solution:

Note: The solution fits Autel Maxisys MS908 Pro as well.

Un-install all upgraded software
Come to Autel MS908 diagnostic scanner main unit, select “Data Manager” function

3-1

3) Select “Apps”

3-2
4) Delete upgraded software

3-3

5) Download and update the vehicle software you need again, wait the procedure completed.
3-4

6) Re-connect the Maxisys  MS908P with vehicle and perform diagnosis.

http://autelscanner.blogspot.com/

 



[ 12:26 ] [ 3/09/2017 ] [ ] [ 0 commentaires ] [ Ajouter un commentaire ] [ Lien ]
Mots clefs : Autel Maxisys ProMaxisys Pro MS908PMaxiSYS ProAutel Maxisys Pro Scan ToolMS908 PROAutel MaxiSys Pro MS908PAutel MS908P

MB Star C3 092015 Xentry cannot work on W204

MB Star C3 Star diagnostic system failed to work on Mercedes W204? Here is the customer solution. You are at your risk!

Problem:

I have DELL D630 with Xentry 09/2015 and Mercedes Benz Star diagnosis C3 multiplexer. I have connected many cars (W202, W203, W210, W211, W245, etc) and there is no problem with connection – everything is working like a charm. Some days ago, I have bought W204 C280 from 2007. After I choose model, engine and transmission, and I go to diagnostic I see this:

“The diagnosis application is being started…”

27-1
and few seconds later this:

“Initialization of the multiplexer has failed”

27-2

My Mux is not compatible with W204? I searched few hours without success.

Customer solution:
W204 and X204 is the last Mercedes models which working without some special modifications.
You can try:

First try in toolkit.ini delete line skipcomports=all and set line usecomport=2 then you will see in SDconnect toolkit PartD on display after mux connection.

First save your original file for sure.

Try look into C:\Userdata\Config\Xentry\driver – slave.ini and set there com port which you have used for PartD.

Report:

There was no change because I didn’t restarted system. After restart work perfect.

Your solution work perfectly! Probem solved. Everything is working like a charm.

Youobd2.com solution:

If you need to deal with newer Mercedes models, better go for MB SD Connect C4 or MB SD C5 diagnostic system.

http://youobd2qing.naganoblog.jp/e2148923.html



[ 09:08 ] [ 27/08/2017 ] [ ] [ 0 commentaires ] [ Ajouter un commentaire ] [ Lien ]
Mots clefs : Benz Diagnostic ToolBenz Scan ToolMercedes Benz C4MB STAR C4MB SD C4MB STAR C4 For SaleMB Star Compact C4MB SD Connect Compact 4 StarMB Star C4 ScannerMB SD Compact C4MB SD Connect C4

MB sdconnect DAS Xentry Errors Failures and Solutions (Words & Pictures)

MB sdconnect DAS Xentry Errors Failures and Solutions (Words & Pictures)

Topic: Collection of most concerned MB sdconnect DAS Xentry errors / failures and working solutions by www.cnautotool.com senior engineer.
This post is long but most helpful; please add to your favorites.
PS: pay only $475 you could get one new MB sdconnect now.

Most concerned FAQ (press ctrl+f to search):  

Q: How to reset DAS language?
A: Right click the DAS icon on desktop to open DAS Properties and click Shortcut. The letter “en” after letter “l” means English language, so if you want to reset other language i.e. French then change as”fr”.

Click “OK” to save setting.

Q: How to reset Xentry language?

A: Click the blue Gear-like icon at the left corner of Xentry, then “Setting language” then the language you want, then click “OK” to agree restart Xentry.

Q: Got error after reset Xentry language.

A: Exit Xentry then reset your computer system language, for example, your Xentry version is 09/2019 then reset the time as any day of September, i.e 09/05/2016.

Q: Got error ” No valid DAS license; DAS will now be closed” after DAS activation.

A: 1. Go to C:// programme files/Mercedes-Benz/StartKeyCenter2 and open “StartKeyCenter.exe” (see below picture), if DAS activation is valid, then go to C:// then open DAS  folder to replace bin file (programme files/Mercedes-Benz/DAS) 2. If it displays activation is invalid, send DS Lan-ID to uobdii.com customer service to active.

Q: Run Xentry and got “2221-45” error.

A: Click C:// programme files/Mercedes-Benz/Xentry/fusoko/eclipse/plugins, delete “com.daimler.xentry.diagservice-…”.

Q: EWA-NET can’t star, how to solve?

A: Click computer “Start” then “EWA – NET Admin Tool” to enter.
1.Click “Start EWA server” “”Start EPC server” “Start WIS server” (If they were started, click “Stop” then    “Restart”.
2.Reboot the computer then open EWA-NET to login.

Q: mb sdconnect firmware program lost, WIFI pass fails to reset and 204 error.


A: 1. Reason: the sdconnect Mux firmware program is deleted, the result is WIFI and MB SD Connect C4/C5 number can’t be reset.
Solution: update firmware, mb sdconnect c4 update guide:
one-by-one update 01_Booimage_2_3.zip, then 02_CSD_2_10.zip, 03_PmPic29_Cpld13.zip.

Key: 1) Install new battery 2) Plug OBD cable into the car for power (or use OBD 12V battery adapter for replacement, otherwise you may get 622 error)

Q: after enter sdconnect Administration, got 749 error.

A: Go to “Local area connection” to reset IP address: 172.29.127.119
Q: sdconnect 30 and 31 error, have poor communication with cars.


A: Possible reasons:
1.The cable and vehicle has poor communication.
2.The wired and wireless IP is not reset as required.
3.Run Star C3 software on sdconnect toolkit.
4.If the above 3 pieces have no problem, maybe the MUX or the cable has problem. Contact email at your supplier.

http://autotool.biz/2017/05/24/mb-sdconnect-das-xentry-errors-failures-and-solutions-words-pictures/



[ 12:13 ] [ 29/05/2017 ] [ ] [ 0 commentaires ] [ Ajouter un commentaire ] [ Lien ]
Mots clefs : MB STARBenz diagnostic toolMercedes Scan ToolMercedes ScannerMercedes Star DiagnosisMercedes Diagnostic ToolMercedes Benz Diagnostic ToolMB STAR Diagnostic ToolStar Diagnosis

NEXIQ USB LINK (ORIGINAL) DISCONTINUED

Will you do some maintenance work for your car? Or, are you willing to do some maintenance work for your car?

In early 2015, Nexiq Technologies discontinued the “tried and true” original Nexiq USB Link. This adapter had been around for around 7 years, and was wildly popular. One of the main reasons that the Nexuq USB Link became so popular was because of their distribution. Nexiq is 100% owned by Snap On, so between the large marketing spends, industry trade shows, and Snap On tool trucks, Nexiq has an unmatched distribution network. The other large source of their distribution comes from formal truck dealerships, as Nexiq is the recommended product for various truck manufacturers such as International, Freightliner, and many others.

 

The USB-Link 2, the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

It also includes a new Bluetooth* module with an enhanced data rate to support wireless communication (500 b/s J1939). For even more reliability, we've upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.

·  Latching USB Cable (Part # 404032)

·  6 and 9 pin Deutsch Adapter (Part # 493148)

·  storage case

 

Usability

·  Class 1 Bluetooth provides up to 100 feet of wireless freedom.

·  Flexible configuration supports wired or wireless connectivity.

·  Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.

·  Reduce reprogramming times with direct USB connection.

·  Mixed fleet capabilities with broad protocol support.

·  Quick access to vehicle data for maintenance or management reports.

·  Quickly attaches to vehicle's diagnostic connector.

·  No messy cables to untangle or get in the way with Bluetooth.

·  Easy portability increases flexibility.

·  May be used with desktop PC or laptop.

 

I think,it can help you for know more about your car,and make more convenience.

If you have any question, you can click the below, you can get more information with it.

http://www.obd2tool.com/goods-5163-NEXIQ-2+USB+Link++Software+Diesel+Truck+Interface+And+Software+With+All+Installers.html



[ 04:19 ] [ 22/01/2017 ] [ ] [ 0 commentaires ] [ Ajouter un commentaire ] [ Lien ]
Mots clefs :